Items included with the Brocade 7800 Extension Switch

The following items are included with the standard shipment of the Brocade 7800:

  • The Brocade 7800 Extension Switch, containing two combined power supply/fan assembly FRUs
  • The following rack mount kits are optionally available:
    • Fixed rack mount kit, with installation instructions
    • Slide rack mount kit, with installation instructions
    • Mid-mount kit, with installation instructions
  • One accessory kit, containing the following items:
    • SFP transceivers for Fibre Channel ports:
      • Base model - 4 SWL optical
      • Upgrade model - 16 SWL optical
    • SFP transceivers for the GbE ports - upgrade model - 4 copper or 6 SWL optical (optical SFPs must be 4 Gbps, not 8 Gbps)
    • Rubber mounting feet (to be used when setting up the Extension Switch as a standalone unit)
    • Two grounded 6-ft (approximately 1.83 m) power cords:
      • Power plug type is NEMA5-15
      • Power plug current/voltage rating: 15A/125V
      • Cordage type: SVT
      • Current rating/wire gauge: 10A/ 18AWG
      • Connector at system end of cordset: IEC 60320/ C13
      • Two power cord retainers
    • One RJ-45 serial cable, 10-ft (approximately 3 m) long. The Extension Switch uses an RJ-45 connector for the console port. An RJ-45 to DB9 adaptor is also provided with the Brocade 7800.