FastIron Ethernet Switch Security Configuration Guide

Supporting FastIron Software Release 08.0.30b

Part Number: 53-1003630-03

Configuring RADIUS

Follow the procedure given below to configure a Brocade device for RADIUS.

  1. Configure Brocade vendor-specific attributes on the RADIUS server. Refer to Brocade-specific attributes on the RADIUS server.
  2. Identify the RADIUS server to the Brocade device. Refer to Identifying the RADIUS server to the Brocade device.
  3. Optionally specify different servers for individual AAA functions. Refer to Specifying different servers for individual AAA functions.
  4. Optionally configure the RADIUS server as a "port only" server. Refer to RADIUS server per port.
  5. Optionally bind the RADIUS servers to ports on the Brocade device. Refer to RADIUS server to individual ports mapping.
  6. Set RADIUS parameters. Refer to RADIUS parameters.
  7. Configure authentication-method lists. Refer to Setting authentication-method lists for RADIUS.
  8. Optionally configure RADIUS authorization. Refer to RADIUS authorization.
  9. Optionally configure RADIUS accounting. Refer to RADIUS accounting.