Network OS Administration Guide

Supporting Network OS 6.0.1a

Part Number: 53-1003768-04

Configuring SNMP server groups

SNMP groups map the SNMP user for the version v3 and the community for the versions v1 and v2c to SNMP views. Each SNMP group can be configured with a read view, a write view, a notify view, or all of the above.

Use the following procedure to configure or remove a specified SNMP group.
NOTE
Group creation is not supported for the Brocade VDX 2740 or Brocade VDX 2746. Only the default groups snmpadmin and snmpuser are supported.
  1. Enter the configure command.
  2. Enter the snmp-server group groupname {v1 | v2c | v3 {auth | noauth | priv}} [read viewname] [write viewname] [notify viewname] command.
    switch(config)# snmp-server group group1 v3 auth read myview write myview notify myview
    Enter the no form of the command to remove the configured SNMP server group.
    NOTE
    The maximum number of SNMP groups supported is 10.