Network OS Administration Guide

Supporting Network OS 6.0.1a

Part Number: 53-1003768-04

Removing a member from a zone

  1. In privileged EXEC mode, enter the configure terminal command to enter global configuration mode.
  2. Enter the zoning defined-configuration zone command and enter the name of the zone from which you want to remove a member.

    A subconfiguration mode prompt appears.

  3. Enter the subconfiguration mode no member-entry parameter and specify the WWN or the alias of the member you want to remove.

    You can remove only one member at a time. To remove more than one member, you must issue the no member-entry command for each member you want to remove.

  4. Enter the exit command to return to global configuration mode.
  5. Enter the zoning enabled-configuration cfg-action cfg-save command to save the modified configuration to nonvolatile memory.
    NOTE
    The parent configuration is removed when the last child object is removed, irrespective of the save operation.

    Example of removing more than one member from a zone:

    switch# configure terminal
    Entering configuration mode terminal
    switch(config)# zoning defined-configuration zone zone1 
    switch(config-zone-zone1)# no member-entry 50:05:07:61:00:09:20:b4
    switch(config-zone-zone1)# no member-entry alias3
    switch(config-zone-zone1)# exit
    switch(config)# zoning enabled-configuration cfg-action cfg-save