Network OS Administration Guide

Supporting Network OS 6.0.1a

Part Number: 53-1003768-04

Adding a zone to a zone configuration

  1. In privileged EXEC mode, enter the configure terminal command to enter global configuration mode.
  2. Enter the zoning defined-configuration cfg command and enter the name of the configuration to which you want to add zones.

    The command prompt changes to indicate a subconfiguration mode.

  3. Enter the member-zone subconfiguration mode command and specify the name of at least one member zone.

    Add multiple zones in one operation by separating each zone name with a semicolon (;).

  4. Enter the exit command to return to global configuration mode.
  5. Enter the zoning enabled-configuration cfg-action cfg-save command to save the modified configuration to nonvolatile memory.

    Example of adding two zones to config1:

    switch# configure terminal
    Entering configuration mode terminal
    switch(config)# zoning defined-configuration cfg config1
    switch(config-cfg-config1)# member-zone zone2;zone3
    switch(config-cfg-config1)# exit
    switch(config)# zoning enabled-configuration cfg-action cfg-save