Network OS Administration Guide

Supporting Network OS 6.0.1a

Part Number: 53-1003768-04

Displaying Access Gateway N_Port utilization data

Under Access Gateway, the show ag nport-utilization command displays N_Port utilization information. You can display this information either for a specific RBridge or for all the RBridges.

The information displayed indicates the highest bandwidth utililzation and associated time stamp. Two actions clear such data:
  • Enabling the port
  • Running clear ag nport-utilization
NOTE
For trunk slave ports, no utilization information is printed. Instead, the bandwidth of such ports is included in the bandwidth of the trunk master port.
In Privileged EXEC mode, enter show ag nport-utilization.
switch# show ag nport-utilization
Data such as the following displays:
N_Port(Fi) information :
Port            PortID        Attached PWWN        IP_Addr         VF_Ports
-------------------------------------------------------------------------------
Fi 1/0/7       0xa90900  2f:00:00:05:1e:80:31:4f   10.17.31.169    1/1/1, 1/1/2
highest bandwidth utilization of 11 % recorded at Wed Apr 30 14:07:42 2014

Fi 1/0/8       0xa90900  2f:00:00:05:1e:80:31:4f   10.17.31.169    None
trunk slave. bandwidth/traffic added to trunk master