Network OS Administration Guide

Supporting Network OS 6.0.1a

Part Number: 53-1003768-04

Removing the time zone setting

Use the no clock timezone command to remove the time zone setting for the local clock. This operation returns the local time zone to the default value (GMT). When using the no operand, you do not need to reference a timezone setting.

Enter the no clock timezone command.

switch# no clock timezone rbridge-id 5
The clock timezone command can be run in privileged EXEC mode, as shown in the previous example, or in RBridge ID configuration mode. Refer to the Network OS Command Reference for descriptions of this command in each of these modes.