Network OS Administration Guide

Supporting Network OS 6.0.1a

Part Number: 53-1003768-04

Deleting an alias

  1. In privileged EXEC mode, enter the show running-config zoning command to display the alias and its member WWNs.
  2. Enter the configure terminal command to enter global configuration mode.
  3. Enter the no zoning defined-configuration alias command followed by the name of the alias you want to delete.
  4. Enter the show running-config zoning command to verify the change in the defined configuration (optional).
  5. Enter the zoning enabled-configuration cfg-action cfg-save command to save the configuration to nonvolatile memory.

    Example of deleting an alias:

    switch# show running-config zoning
    zoning defined-configuration alias alias1
     member-entry 10:00:00:00:00:00:00:01
    !
    zoning enabled-configuration cfg-name ""
    zoning enabled-configuration default-zone-access allaccess
    zoning enabled-configuration cfg-action cfg-none
    switch# 
    switch# configure terminal
    Entering configuration mode terminal
    switch(config)# no zoning defined-configuration alias alias1
    switch(config)# do show running-config zoning
    zoning enabled-configuration cfg-name ""
    zoning enabled-configuration default-zone-access allaccess
    zoning enabled-configuration cfg-action cfg-none
    switch(config)# zoning enabled-configuration cfg-action cfg-save