Network OS Administration Guide

Supporting Network OS 6.0.1a

Part Number: 53-1003768-04

Viewing the contents of a file in the flash memory

To investigate the contents of a file in the flash memory, enter the show file file command in privileged EXEC mode.

switch# show file defaultconfig.novcs
!
no protocol spanning-tree
!
vlan dot1q tag native
!
cee-map default
remap fabric-priority priority 0
remap lossless-priority priority 0
priority-group-table 1 weight 40 pfc on
priority-group-table 2 weight 60 pfc off
priority-group-table 15.0 pfc off
priority-table 2 2 2 1 2 2 2 15.0
!
interface Vlan 1
shutdown
!
port-profile default
vlan-profile
 switchport
 switchport mode trunk
 switchport trunk allowed vlan all
!
protocol lldp
!
end
!
NOTE
To display the contents of the running configuration, use the show running-config command. To display the contents of the startup configuration, use the show startup-config command.