Network OS Administration Guide

Supporting Network OS 6.0.1a

Part Number: 53-1003768-04

Viewing threshold status

To view the status of currently configured thresholds, enter the show running-config threshold-monitor command with the RBridge ID, as follows:

switch# show running-config rbridge-id rbridge_id threshold-monitor
NOTE
Default values are not displayed under the show running-config threshold-monitor command. Only custom values are displayed when a user applies a policy.

To display the default values of thresholds and alert options, enter the show defaults threshold command, as in the following example for interfaces.

switch# show defaults threshold interface type Ethernet

Type: GigE-Port
+--------+-----------------------+----------------------+------+-------+
|        |    High Threshold     |    Low Threshold     |Buffer|Time   |
|Area    |Value | Above  | Below |Value | Above | Below |Value |Base   |
|        |      | Action | Action|      | Action| Action|      |       |
+--------+------+--------+-------+------+-------+-------+------+-------+
|MTC     |  300 | none   | none  |    12| none  | none  |     0|minute |
+--------+------+--------+-------+------+-------+-------+------+-------+
|CRCAlign|  300 | none   | none  |    12| none  | none  |     0|minute |
+--------+------+--------+-------+------+-------+-------+------+-------+
|Symbol  |    5 | none   | none  |     0| none  | none  |     0|minute |
+--------+------+--------+-------+------+-------+-------+------+-------+
|IFG     |  100 | none   | none  |     5| none  | none  |     0|minute |
+--------+------+--------+-------+------+-------+-------+------+-------+
MTC - Missing Termination Character