Network OS Administration Guide

Supporting Network OS 6.0.1a

Part Number: 53-1003768-04

Removing an NTP server IP address

To remove an NTP server IP address from the list of server IP addresses on a switch, enter no ntp server followed by the server IP address.

The following example removes the NTP server at from the local server IP address database.

switch(config)# no ntp server
switch# show ntp status
rbridge-id 1: active ntp server is LOCL
At least one IP address in the remaining list must be for a reachable and configured NTP server; if there is not one the remove request will fail.