Network OS Administration Guide

Supporting Network OS 6.0.1a

Part Number: 53-1003768-04

Setting the SNMP server contact

Use the snmp-server contact command to set the SNMP server contact string. The default contact string is "Field Support." The number of characters allowed is from 4 through 255.

  1. Enter the configure command.
  2. Enter the snmp-server contact string command.
    switch(config)# snmp-server contact "Operator 12345"

    The example changes the default contact string to "Operator 12345." You must enclose the text in double quotes if the text contains spaces.