Network OS Administration Guide

Supporting Network OS 6.0.1a

Part Number: 53-1003768-04

Restoring the default configuration

This restoration procedure resets the configuration to the factory defaults. The default configuration files are always present on the switch and can be restored with the copy command.

To restore the default configuration, perform the following procedure in privileged EXEC mode.

  1. Enter the copy source_file destination_file command to overwrite the startup configuration with the default configuration.
    switch# copy  default-config startup-config
  2. Confirm that you want to make the change by entering Y when prompted.
    This operation will modify your startup configuration. Do you want to continue? [Y/N]: y
  3. Reboot the switch.
    switch# reload system