Network OS Administration Guide

Supporting Network OS 6.0.1a

Part Number: 53-1003768-04

Re-enabling the Telnet service

Re-enabling the Telnet service permits Telnet access to a switch.

You must be in global configuration mode to shut down the Telnet service on a switch.

To re-enable the Telnet service on a switch enter no telnet server shutdown.
switch(config)# no telnet server shutdown
NOTE
If you are in VCS mode, you must enter RBridge ID configuration mode before issuing the command.
switch(config)# rbridge-id 3
switch(config-rbridge-id-3)# no telnet server shutdown