Network OS Administration Guide

Supporting Network OS 6.0.1a

Part Number: 53-1003768-04

Adding a member to a zone

  1. In privileged EXEC mode, enter the show name-server detail command to list the WWNs of devices and targets available on the Brocade VCS Fabric cluster.
  2. Enter the configure terminal command to enter global configuration mode.
  3. Enter the zoning defined-configuration zone command and enter the name of an existing zone.

    A subconfiguration mode prompt appears.

  4. Enter the subconfiguration mode member-entry command and specify the member you want to add.

    The new member can be specified by a port WWN, a node WWN, or a zone alias.

    Add multiple members in one operation by separating each member with a semicolon (;).

  5. Enter the exit command to return to the global configuration mode.
  6. Enter the zoning enabled-configuration cfg-action cfg-save command to save the modified configuration to nonvolatile memory.

    Example of adding three members to a zone, two node WWNs and an alias:

    switch# show name-server detail
    PID: 012100
    Port Name: 50:05:07:61:00:1b:62:ed
    Node Name: 50:05:07:61:00:1b:62:ed
          (output truncated)
    PID: 012200
    Port Name: 50:05:07:61:00:09:20:b4
    Node Name: 50:05:07:61:00:09:20:b4
          (output truncated)
    
    switch# configure terminal
    Entering configuration mode terminal
    switch(config)# zoning defined-configuration zone zone1 
    switch(config-zone-zone1)# member-entry 50:05:07:61:00:1b:62:ed;50:05:07:61:00:09:20:b4;alias3
    switch(config-zone-zone1)# exit
    switch(config)# zoning enabled-configuration cfg-action cfg-save