Network OS Administration Guide

Supporting Network OS 6.0.1a

Part Number: 53-1003768-04

Configuring security monitoring

  1. Issue the configure terminal command to enter global configuration mode.
  2. Enter RBridge ID configuration mode, as in the following example.
    switch(config)# rbridge-id 154
  3. Enter the threshold-monitor security command to configure custom login-violation monitoring, as in the following example.
    switch(config-rbridge-id-154)# threshold-monitor security
    policy mypolicy area login-violation alert above highthresh-action
    raslog below highthresh-action email lowthresh-action none
  4. Apply the policy.
    switch(config-rbridge-id-154)# threshold-monitor security apply mypolicy